MPP Solar Charge inverter 1000W DC 12V, MPPT 40A, 20A AC charger all in one Hybrid System, 1012LV-MS


MPP Solar Charge inverter 1000W DC 12V, MPPT 40A, 20A AC charger all in one Hybrid System, 1012LV-MS

2 in stock (can be backordered)




MPP Solar Charge inverter 1000W DC 12V, MPPT 40A, 20A AC charger

All in one Hybrid System, 1012LV-MS

      • 1000W 12V

      • 40A Solar Charge Controller

      • 20A Ac Charger

      • Supports up to 500W of Solar

      • Cannot be paralleled

This product includes a 1000W Solar Charge Inverter with 12V DC Power, a MPPT 40A Charge Controller and a 20A AC charger, it’s all in ONE Hybrid Solar System.

Ideal for RV’s , Cabins and homes with 12V battery power, can start your generator automatically / or j just switch over to utility power if battery runs low during poor daylight / night time. (and recharge the battery at the same time). Perfect for keeping your furnace/ electrical refrigerator running through the night without having to run the generator to keep the battery charged.

This product also comes with MPPT solar charge and also offer free monitoring on PC which is bundled with purchase.



  • 110V / 120V adjustable output design for low voltage area like North America
  • Pure sine wave inverter with built– in solar controller
  • 40A MPPT built-in solar charger
  • Does not support parallel operations
  • 50Hz & 60Hz support
  • Selectable AC input volt range
  • Programmable parameters
  • 20A charging from AC (grid or generator**)
  • This is not for grid tie, it is only for off-grid use
  • Adjustable bulk & float charging voltage
  • Genset starter dry contact
  • Overload and short circuit protection
  • Lightweight, easy to install
  • FREE monitoring software
  • LCD Display + LED indicators

**requires inverter-type generator of acceptable output quality


Max Continuous Power: 1000W
Parallel Capability: None
Input Voltage Range: 65~140VAC (Appliance mode), 95~140VAC (UPS mode)
Input/Output Frequency: 50Hz/60hz Auto sensing
Output Voltage: 110/120VAC±5% user selectable
Output Waveform: Pure Sine Wave
Peak Efficiency: 90%
Nominal DC Voltage: 12V
Max DC Voltage (battery): 15.5V
Transfer Time: <10ms (UPS mode), <20ms (Appliance mode)
Charging Mode: 3-stage
AC Recharging Current: 20A
No Load Power Consumption: <15W
Power Saving Mode: <5W

Algorithm: MPPT
Max PV Input / Output: 500W
Max Charging Current: 40A
Max PV Input Voc: 102V
MPPT Range: 15V-80V
Standby Power: 2W

Operating/Storage Temp.: 0°C ~ 55°C / -15°C~ 60°C
Operating Humidity: 20~90%RH Non-Condensing
Dimension: 355*272*100mm (14 x 10.7 x 4″)
Net Weight 6.5kg


PIP-LV Spec Sheet: 


PIP-LV User Manual:

PIP-MS LV 1KVA 1-5KVA manual-20200318-min